core_cm1.h
1 /**************************************************************************//** 2 * @file core_cm1.h 3 * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File 4 * @version V1.0.1 5 * @date 12. November 2018 6 ******************************************************************************/ 7 /* 8 * Copyright (c) 2009-2018 Arm Limited. All rights reserved. 9 * 10 * SPDX-License-Identifier: Apache-2.0 11 * 12 * Licensed under the Apache License, Version 2.0 (the License); you may 13 * not use this file except in compliance with the License. 14 * You may obtain a copy of the License at 15 * 16 * www.apache.org/licenses/LICENSE-2.0 17 * 18 * Unless required by applicable law or agreed to in writing, software 19 * distributed under the License is distributed on an AS IS BASIS, WITHOUT 20 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 21 * See the License for the specific language governing permissions and 22 * limitations under the License. 23 */ 24 25 #if defined ( __ICCARM__ ) 26 #pragma system_include /* treat file as system include file for MISRA check */ 27 #elif defined (__clang__) 28 #pragma clang system_header /* treat file as system include file */ 29 #endif 30 31 #ifndef __CORE_CM1_H_GENERIC 32 #define __CORE_CM1_H_GENERIC 33 34 #include <stdint.h> 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 /** 41 \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions 42 CMSIS violates the following MISRA-C:2004 rules: 43 44 \li Required Rule 8.5, object/function definition in header file.<br> 45 Function definitions in header files are used to allow 'inlining'. 46 47 \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> 48 Unions are used for effective representation of core registers. 49 50 \li Advisory Rule 19.7, Function-like macro defined.<br> 51 Function-like macros are used to allow more efficient code. 52 */ 53 54 55 /******************************************************************************* 56 * CMSIS definitions 57 ******************************************************************************/ 58 /** 59 \ingroup Cortex_M1 60 @{ 61 */ 62 63 #include "cmsis_version.h" 64 65 /* CMSIS CM1 definitions */ 66 #define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ 67 #define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ 68 #define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ 69 __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ 70 71 #define __CORTEX_M (1U) /*!< Cortex-M Core */ 72 73 /** __FPU_USED indicates whether an FPU is used or not. 74 This core does not support an FPU at all 75 */ 76 #define __FPU_USED 0U 77 78 #if defined ( __CC_ARM ) 79 #if defined __TARGET_FPU_VFP 80 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" 81 #endif 82 83 #elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) 84 #if defined __ARM_FP 85 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" 86 #endif 87 88 #elif defined ( __GNUC__ ) 89 #if defined (__VFP_FP__) && !defined(__SOFTFP__) 90 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" 91 #endif 92 93 #elif defined ( __ICCARM__ ) 94 #if defined __ARMVFP__ 95 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" 96 #endif 97 98 #elif defined ( __TI_ARM__ ) 99 #if defined __TI_VFP_SUPPORT__ 100 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" 101 #endif 102 103 #elif defined ( __TASKING__ ) 104 #if defined __FPU_VFP__ 105 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" 106 #endif 107 108 #elif defined ( __CSMC__ ) 109 #if ( __CSMC__ & 0x400U) 110 #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" 111 #endif 112 113 #endif 114 115 #include "cmsis_compiler.h" /* CMSIS compiler specific defines */ 116 117 118 #ifdef __cplusplus 119 } 120 #endif 121 122 #endif /* __CORE_CM1_H_GENERIC */ 123 124 #ifndef __CMSIS_GENERIC 125 126 #ifndef __CORE_CM1_H_DEPENDANT 127 #define __CORE_CM1_H_DEPENDANT 128 129 #ifdef __cplusplus 130 extern "C" { 131 #endif 132 133 /* check device defines and use defaults */ 134 #if defined __CHECK_DEVICE_DEFINES 135 #ifndef __CM1_REV 136 #define __CM1_REV 0x0100U 137 #warning "__CM1_REV not defined in device header file; using default!" 138 #endif 139 140 #ifndef __NVIC_PRIO_BITS 141 #define __NVIC_PRIO_BITS 2U 142 #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" 143 #endif 144 145 #ifndef __Vendor_SysTickConfig 146 #define __Vendor_SysTickConfig 0U 147 #warning "__Vendor_SysTickConfig not defined in device header file; using default!" 148 #endif 149 #endif 150 151 /* IO definitions (access restrictions to peripheral registers) */ 152 /** 153 \defgroup CMSIS_glob_defs CMSIS Global Defines 154 155 <strong>IO Type Qualifiers</strong> are used 156 \li to specify the access to peripheral variables. 157 \li for automatic generation of peripheral register debug information. 158 */ 159 #ifdef __cplusplus 160 #define __I volatile /*!< Defines 'read only' permissions */ 161 #else 162 #define __I volatile const /*!< Defines 'read only' permissions */ 163 #endif 164 #define __O volatile /*!< Defines 'write only' permissions */ 165 #define __IO volatile /*!< Defines 'read / write' permissions */ 166 167 /* following defines should be used for structure members */ 168 #define __IM volatile const /*! Defines 'read only' structure member permissions */ 169 #define __OM volatile /*! Defines 'write only' structure member permissions */ 170 #define __IOM volatile /*! Defines 'read / write' structure member permissions */ 171 172 /*@} end of group Cortex_M1 */ 173 174 175 176 /******************************************************************************* 177 * Register Abstraction 178 Core Register contain: 179 - Core Register 180 - Core NVIC Register 181 - Core SCB Register 182 - Core SysTick Register 183 ******************************************************************************/ 184 /** 185 \defgroup CMSIS_core_register Defines and Type Definitions 186 \brief Type definitions and defines for Cortex-M processor based devices. 187 */ 188 189 /** 190 \ingroup CMSIS_core_register 191 \defgroup CMSIS_CORE Status and Control Registers 192 \brief Core Register type definitions. 193 @{ 194 */ 195 196 /** 197 \brief Union type to access the Application Program Status Register (APSR). 198 */ 199 typedef union 200 { 201 struct 202 { 203 uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ 204 uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ 205 uint32_t C:1; /*!< bit: 29 Carry condition code flag */ 206 uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ 207 uint32_t N:1; /*!< bit: 31 Negative condition code flag */ 208 } b; /*!< Structure used for bit access */ 209 uint32_t w; /*!< Type used for word access */ 210 } APSR_Type; 211 212 /* APSR Register Definitions */ 213 #define APSR_N_Pos 31U /*!< APSR: N Position */ 214 #define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ 215 216 #define APSR_Z_Pos 30U /*!< APSR: Z Position */ 217 #define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ 218 219 #define APSR_C_Pos 29U /*!< APSR: C Position */ 220 #define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ 221 222 #define APSR_V_Pos 28U /*!< APSR: V Position */ 223 #define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ 224 225 226 /** 227 \brief Union type to access the Interrupt Program Status Register (IPSR). 228 */ 229 typedef union 230 { 231 struct 232 { 233 uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ 234 uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ 235 } b; /*!< Structure used for bit access */ 236 uint32_t w; /*!< Type used for word access */ 237 } IPSR_Type; 238 239 /* IPSR Register Definitions */ 240 #define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ 241 #define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ 242 243 244 /** 245 \brief Union type to access the Special-Purpose Program Status Registers (xPSR). 246 */ 247 typedef union 248 { 249 struct 250 { 251 uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ 252 uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ 253 uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ 254 uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ 255 uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ 256 uint32_t C:1; /*!< bit: 29 Carry condition code flag */ 257 uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ 258 uint32_t N:1; /*!< bit: 31 Negative condition code flag */ 259 } b; /*!< Structure used for bit access */ 260 uint32_t w; /*!< Type used for word access */ 261 } xPSR_Type; 262 263 /* xPSR Register Definitions */ 264 #define xPSR_N_Pos 31U /*!< xPSR: N Position */ 265 #define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ 266 267 #define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ 268 #define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ 269 270 #define xPSR_C_Pos 29U /*!< xPSR: C Position */ 271 #define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ 272 273 #define xPSR_V_Pos 28U /*!< xPSR: V Position */ 274 #define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ 275 276 #define xPSR_T_Pos 24U /*!< xPSR: T Position */ 277 #define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ 278 279 #define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ 280 #define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ 281 282 283 /** 284 \brief Union type to access the Control Registers (CONTROL). 285 */ 286 typedef union 287 { 288 struct 289 { 290 uint32_t _reserved0:1; /*!< bit: 0 Reserved */ 291 uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ 292 uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ 293 } b; /*!< Structure used for bit access */ 294 uint32_t w; /*!< Type used for word access */ 295 } CONTROL_Type; 296 297 /* CONTROL Register Definitions */ 298 #define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ 299 #define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ 300 301 /*@} end of group CMSIS_CORE */ 302 303 304 /** 305 \ingroup CMSIS_core_register 306 \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) 307 \brief Type definitions for the NVIC Registers 308 @{ 309 */ 310 311 /** 312 \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). 313 */ 314 typedef struct 315 { 316 __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ 317 uint32_t RESERVED0[31U]; 318 __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ 319 uint32_t RSERVED1[31U]; 320 __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ 321 uint32_t RESERVED2[31U]; 322 __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ 323 uint32_t RESERVED3[31U]; 324 uint32_t RESERVED4[64U]; 325 __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ 326 } NVIC_Type; 327 328 /*@} end of group CMSIS_NVIC */ 329 330 331 /** 332 \ingroup CMSIS_core_register 333 \defgroup CMSIS_SCB System Control Block (SCB) 334 \brief Type definitions for the System Control Block Registers 335 @{ 336 */ 337 338 /** 339 \brief Structure type to access the System Control Block (SCB). 340 */ 341 typedef struct 342 { 343 __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ 344 __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ 345 uint32_t RESERVED0; 346 __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ 347 __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ 348 __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ 349 uint32_t RESERVED1; 350 __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ 351 __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ 352 } SCB_Type; 353 354 /* SCB CPUID Register Definitions */ 355 #define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ 356 #define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ 357 358 #define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ 359 #define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ 360 361 #define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ 362 #define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ 363 364 #define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ 365 #define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ 366 367 #define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ 368 #define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ 369 370 /* SCB Interrupt Control State Register Definitions */ 371 #define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ 372 #define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ 373 374 #define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ 375 #define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ 376 377 #define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ 378 #define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ 379 380 #define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ 381 #define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ 382 383 #define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ 384 #define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ 385 386 #define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ 387 #define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ 388 389 #define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ 390 #define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ 391 392 #define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ 393 #define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ 394 395 #define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ 396 #define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ 397 398 /* SCB Application Interrupt and Reset Control Register Definitions */ 399 #define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ 400 #define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ 401 402 #define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ 403 #define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ 404 405 #define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ 406 #define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ 407 408 #define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ 409 #define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ 410 411 #define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ 412 #define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ 413 414 /* SCB System Control Register Definitions */ 415 #define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ 416 #define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ 417 418 #define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ 419 #define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ 420 421 #define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ 422 #define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ 423 424 /* SCB Configuration Control Register Definitions */ 425 #define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ 426 #define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ 427 428 #define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ 429 #define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ 430 431 /* SCB System Handler Control and State Register Definitions */ 432 #define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ 433 #define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ 434 435 /*@} end of group CMSIS_SCB */ 436 437 438 /** 439 \ingroup CMSIS_core_register 440 \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) 441 \brief Type definitions for the System Control and ID Register not in the SCB 442 @{ 443 */ 444 445 /** 446 \brief Structure type to access the System Control and ID Register not in the SCB. 447 */ 448 typedef struct 449 { 450 uint32_t RESERVED0[2U]; 451 __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ 452 } SCnSCB_Type; 453 454 /* Auxiliary Control Register Definitions */ 455 #define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ 456 #define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ 457 458 #define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ 459 #define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ 460 461 /*@} end of group CMSIS_SCnotSCB */ 462 463 464 /** 465 \ingroup CMSIS_core_register 466 \defgroup CMSIS_SysTick System Tick Timer (SysTick) 467 \brief Type definitions for the System Timer Registers. 468 @{ 469 */ 470 471 /** 472 \brief Structure type to access the System Timer (SysTick). 473 */ 474 typedef struct 475 { 476 __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ 477 __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ 478 __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ 479 __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ 480 } SysTick_Type; 481 482 /* SysTick Control / Status Register Definitions */ 483 #define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ 484 #define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ 485 486 #define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ 487 #define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ 488 489 #define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ 490 #define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ 491 492 #define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ 493 #define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ 494 495 /* SysTick Reload Register Definitions */ 496 #define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ 497 #define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ 498 499 /* SysTick Current Register Definitions */ 500 #define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ 501 #define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ 502 503 /* SysTick Calibration Register Definitions */ 504 #define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ 505 #define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ 506 507 #define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ 508 #define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ 509 510 #define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ 511 #define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ 512 513 /*@} end of group CMSIS_SysTick */ 514 515 516 /** 517 \ingroup CMSIS_core_register 518 \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) 519 \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. 520 Therefore they are not covered by the Cortex-M1 header file. 521 @{ 522 */ 523 /*@} end of group CMSIS_CoreDebug */ 524 525 526 /** 527 \ingroup CMSIS_core_register 528 \defgroup CMSIS_core_bitfield Core register bit field macros 529 \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). 530 @{ 531 */ 532 533 /** 534 \brief Mask and shift a bit field value for use in a register bit range. 535 \param[in] field Name of the register bit field. 536 \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. 537 \return Masked and shifted value. 538 */ 539 #define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) 540 541 /** 542 \brief Mask and shift a register value to extract a bit filed value. 543 \param[in] field Name of the register bit field. 544 \param[in] value Value of register. This parameter is interpreted as an uint32_t type. 545 \return Masked and shifted bit field value. 546 */ 547 #define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) 548 549 /*@} end of group CMSIS_core_bitfield */ 550 551 552 /** 553 \ingroup CMSIS_core_register 554 \defgroup CMSIS_core_base Core Definitions 555 \brief Definitions for base addresses, unions, and structures. 556 @{ 557 */ 558 559 /* Memory mapping of Core Hardware */ 560 #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ 561 #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ 562 #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ 563 #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ 564 565 #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ 566 #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ 567 #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ 568 #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ 569 570 571 /*@} */ 572 573 574 575 /******************************************************************************* 576 * Hardware Abstraction Layer 577 Core Function Interface contains: 578 - Core NVIC Functions 579 - Core SysTick Functions 580 - Core Register Access Functions 581 ******************************************************************************/ 582 /** 583 \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference 584 */ 585 586 587 588 /* ########################## NVIC functions #################################### */ 589 /** 590 \ingroup CMSIS_Core_FunctionInterface 591 \defgroup CMSIS_Core_NVICFunctions NVIC Functions 592 \brief Functions that manage interrupts and exceptions via the NVIC. 593 @{ 594 */ 595 596 #ifdef CMSIS_NVIC_VIRTUAL 597 #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE 598 #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" 599 #endif 600 #include CMSIS_NVIC_VIRTUAL_HEADER_FILE 601 #else 602 #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping 603 #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping 604 #define NVIC_EnableIRQ __NVIC_EnableIRQ 605 #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ 606 #define NVIC_DisableIRQ __NVIC_DisableIRQ 607 #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ 608 #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ 609 #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ 610 /*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ 611 #define NVIC_SetPriority __NVIC_SetPriority 612 #define NVIC_GetPriority __NVIC_GetPriority 613 #define NVIC_SystemReset __NVIC_SystemReset 614 #endif /* CMSIS_NVIC_VIRTUAL */ 615 616 #ifdef CMSIS_VECTAB_VIRTUAL 617 #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE 618 #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" 619 #endif 620 #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE 621 #else 622 #define NVIC_SetVector __NVIC_SetVector 623 #define NVIC_GetVector __NVIC_GetVector 624 #endif /* (CMSIS_VECTAB_VIRTUAL) */ 625 626 #define NVIC_USER_IRQ_OFFSET 16 627 628 629 /* The following EXC_RETURN values are saved the LR on exception entry */ 630 #define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ 631 #define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ 632 #define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ 633 634 635 /* Interrupt Priorities are WORD accessible only under Armv6-M */ 636 /* The following MACROS handle generation of the register offset and byte masks */ 637 #define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) 638 #define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) 639 #define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) 640 641 #define __NVIC_SetPriorityGrouping(X) (void)(X) 642 #define __NVIC_GetPriorityGrouping() (0U) 643 644 /** 645 \brief Enable Interrupt 646 \details Enables a device specific interrupt in the NVIC interrupt controller. 647 \param [in] IRQn Device specific interrupt number. 648 \note IRQn must not be negative. 649 */ 650 __STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) 651 { 652 if ((int32_t)(IRQn) >= 0) 653 { 654 __COMPILER_BARRIER(); 655 NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); 656 __COMPILER_BARRIER(); 657 } 658 } 659 660 661 /** 662 \brief Get Interrupt Enable status 663 \details Returns a device specific interrupt enable status from the NVIC interrupt controller. 664 \param [in] IRQn Device specific interrupt number. 665 \return 0 Interrupt is not enabled. 666 \return 1 Interrupt is enabled. 667 \note IRQn must not be negative. 668 */ 669 __STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) 670 { 671 if ((int32_t)(IRQn) >= 0) 672 { 673 return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); 674 } 675 else 676 { 677 return(0U); 678 } 679 } 680 681 682 /** 683 \brief Disable Interrupt 684 \details Disables a device specific interrupt in the NVIC interrupt controller. 685 \param [in] IRQn Device specific interrupt number. 686 \note IRQn must not be negative. 687 */ 688 __STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) 689 { 690 if ((int32_t)(IRQn) >= 0) 691 { 692 NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); 693 __DSB(); 694 __ISB(); 695 } 696 } 697 698 699 /** 700 \brief Get Pending Interrupt 701 \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. 702 \param [in] IRQn Device specific interrupt number. 703 \return 0 Interrupt status is not pending. 704 \return 1 Interrupt status is pending. 705 \note IRQn must not be negative. 706 */ 707 __STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) 708 { 709 if ((int32_t)(IRQn) >= 0) 710 { 711 return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); 712 } 713 else 714 { 715 return(0U); 716 } 717 } 718 719 720 /** 721 \brief Set Pending Interrupt 722 \details Sets the pending bit of a device specific interrupt in the NVIC pending register. 723 \param [in] IRQn Device specific interrupt number. 724 \note IRQn must not be negative. 725 */ 726 __STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) 727 { 728 if ((int32_t)(IRQn) >= 0) 729 { 730 NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); 731 } 732 } 733 734 735 /** 736 \brief Clear Pending Interrupt 737 \details Clears the pending bit of a device specific interrupt in the NVIC pending register. 738 \param [in] IRQn Device specific interrupt number. 739 \note IRQn must not be negative. 740 */ 741 __STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) 742 { 743 if ((int32_t)(IRQn) >= 0) 744 { 745 NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); 746 } 747 } 748 749 750 /** 751 \brief Set Interrupt Priority 752 \details Sets the priority of a device specific interrupt or a processor exception. 753 The interrupt number can be positive to specify a device specific interrupt, 754 or negative to specify a processor exception. 755 \param [in] IRQn Interrupt number. 756 \param [in] priority Priority to set. 757 \note The priority cannot be set for every processor exception. 758 */ 759 __STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) 760 { 761 if ((int32_t)(IRQn) >= 0) 762 { 763 NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | 764 (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); 765 } 766 else 767 { 768 SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | 769 (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); 770 } 771 } 772 773 774 /** 775 \brief Get Interrupt Priority 776 \details Reads the priority of a device specific interrupt or a processor exception. 777 The interrupt number can be positive to specify a device specific interrupt, 778 or negative to specify a processor exception. 779 \param [in] IRQn Interrupt number. 780 \return Interrupt Priority. 781 Value is aligned automatically to the implemented priority bits of the microcontroller. 782 */ 783 __STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) 784 { 785 786 if ((int32_t)(IRQn) >= 0) 787 { 788 return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); 789 } 790 else 791 { 792 return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); 793 } 794 } 795 796 797 /** 798 \brief Encode Priority 799 \details Encodes the priority for an interrupt with the given priority group, 800 preemptive priority value, and subpriority value. 801 In case of a conflict between priority grouping and available 802 priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. 803 \param [in] PriorityGroup Used priority group. 804 \param [in] PreemptPriority Preemptive priority value (starting from 0). 805 \param [in] SubPriority Subpriority value (starting from 0). 806 \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). 807 */ 808 __STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) 809 { 810 uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ 811 uint32_t PreemptPriorityBits; 812 uint32_t SubPriorityBits; 813 814 PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); 815 SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); 816 817 return ( 818 ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | 819 ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) 820 ); 821 } 822 823 824 /** 825 \brief Decode Priority 826 \details Decodes an interrupt priority value with a given priority group to 827 preemptive priority value and subpriority value. 828 In case of a conflict between priority grouping and available 829 priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. 830 \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). 831 \param [in] PriorityGroup Used priority group. 832 \param [out] pPreemptPriority Preemptive priority value (starting from 0). 833 \param [out] pSubPriority Subpriority value (starting from 0). 834 */ 835 __STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) 836 { 837 uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ 838 uint32_t PreemptPriorityBits; 839 uint32_t SubPriorityBits; 840 841 PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); 842 SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); 843 844 *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); 845 *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); 846 } 847 848 849 850 /** 851 \brief Set Interrupt Vector 852 \details Sets an interrupt vector in SRAM based interrupt vector table. 853 The interrupt number can be positive to specify a device specific interrupt, 854 or negative to specify a processor exception. 855 Address 0 must be mapped to SRAM. 856 \param [in] IRQn Interrupt number 857 \param [in] vector Address of interrupt handler function 858 */ 859 __STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) 860 { 861 uint32_t *vectors = (uint32_t *)0x0U; 862 vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; 863 /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ 864 } 865 866 867 /** 868 \brief Get Interrupt Vector 869 \details Reads an interrupt vector from interrupt vector table. 870 The interrupt number can be positive to specify a device specific interrupt, 871 or negative to specify a processor exception. 872 \param [in] IRQn Interrupt number. 873 \return Address of interrupt handler function 874 */ 875 __STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) 876 { 877 uint32_t *vectors = (uint32_t *)0x0U; 878 return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; 879 } 880 881 882 /** 883 \brief System Reset 884 \details Initiates a system reset request to reset the MCU. 885 */ 886 __NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) 887 { 888 __DSB(); /* Ensure all outstanding memory accesses included 889 buffered write are completed before reset */ 890 SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | 891 SCB_AIRCR_SYSRESETREQ_Msk); 892 __DSB(); /* Ensure completion of memory access */ 893 894 for(;;) /* wait until reset */ 895 { 896 __NOP(); 897 } 898 } 899 900 /*@} end of CMSIS_Core_NVICFunctions */ 901 902 903 /* ########################## FPU functions #################################### */ 904 /** 905 \ingroup CMSIS_Core_FunctionInterface 906 \defgroup CMSIS_Core_FpuFunctions FPU Functions 907 \brief Function that provides FPU type. 908 @{ 909 */ 910 911 /** 912 \brief get FPU type 913 \details returns the FPU type 914 \returns 915 - \b 0: No FPU 916 - \b 1: Single precision FPU 917 - \b 2: Double + Single precision FPU 918 */ 919 __STATIC_INLINE uint32_t SCB_GetFPUType(void) 920 { 921 return 0U; /* No FPU */ 922 } 923 924 925 /*@} end of CMSIS_Core_FpuFunctions */ 926 927 928 929 /* ################################## SysTick function ############################################ */ 930 /** 931 \ingroup CMSIS_Core_FunctionInterface 932 \defgroup CMSIS_Core_SysTickFunctions SysTick Functions 933 \brief Functions that configure the System. 934 @{ 935 */ 936 937 #if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) 938 939 /** 940 \brief System Tick Configuration 941 \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. 942 Counter is in free running mode to generate periodic interrupts. 943 \param [in] ticks Number of ticks between two interrupts. 944 \return 0 Function succeeded. 945 \return 1 Function failed. 946 \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the 947 function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> 948 must contain a vendor-specific implementation of this function. 949 */ 950 __STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) 951 { 952 if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) 953 { 954 return (1UL); /* Reload value impossible */ 955 } 956 957 SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ 958 NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ 959 SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ 960 SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | 961 SysTick_CTRL_TICKINT_Msk | 962 SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ 963 return (0UL); /* Function successful */ 964 } 965 966 #endif 967 968 /*@} end of CMSIS_Core_SysTickFunctions */ 969 970 971 972 973 #ifdef __cplusplus 974 } 975 #endif 976 977 #endif /* __CORE_CM1_H_DEPENDANT */ 978 979 #endif /* __CMSIS_GENERIC */