stm32f4xx_ll_usb.h
1 /** 2 ****************************************************************************** 3 * @file stm32f4xx_ll_usb.h 4 * @author MCD Application Team 5 * @brief Header file of USB Low Layer HAL module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32F4xx_LL_USB_H 21 #define STM32F4xx_LL_USB_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif /* __cplusplus */ 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32f4xx_hal_def.h" 29 30 #if defined (USB_OTG_FS) || defined (USB_OTG_HS) 31 /** @addtogroup STM32F4xx_HAL_Driver 32 * @{ 33 */ 34 35 /** @addtogroup USB_LL 36 * @{ 37 */ 38 39 /* Exported types ------------------------------------------------------------*/ 40 #ifndef HAL_USB_TIMEOUT 41 #define HAL_USB_TIMEOUT 0xF000000U 42 #endif /* define HAL_USB_TIMEOUT */ 43 44 #ifndef HAL_USB_CURRENT_MODE_MAX_DELAY_MS 45 #define HAL_USB_CURRENT_MODE_MAX_DELAY_MS 200U 46 #endif /* define HAL_USB_CURRENT_MODE_MAX_DELAY_MS */ 47 48 /** 49 * @brief USB Mode definition 50 */ 51 52 typedef enum 53 { 54 USB_DEVICE_MODE = 0, 55 USB_HOST_MODE = 1, 56 USB_DRD_MODE = 2 57 } USB_ModeTypeDef; 58 59 /** 60 * @brief URB States definition 61 */ 62 typedef enum 63 { 64 URB_IDLE = 0, 65 URB_DONE, 66 URB_NOTREADY, 67 URB_NYET, 68 URB_ERROR, 69 URB_STALL 70 } USB_URBStateTypeDef; 71 72 /** 73 * @brief Host channel States definition 74 */ 75 typedef enum 76 { 77 HC_IDLE = 0, 78 HC_XFRC, 79 HC_HALTED, 80 HC_ACK, 81 HC_NAK, 82 HC_NYET, 83 HC_STALL, 84 HC_XACTERR, 85 HC_BBLERR, 86 HC_DATATGLERR 87 } USB_HCStateTypeDef; 88 89 90 /** 91 * @brief USB Instance Initialization Structure definition 92 */ 93 typedef struct 94 { 95 uint8_t dev_endpoints; /*!< Device Endpoints number. 96 This parameter depends on the used USB core. 97 This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ 98 99 uint8_t Host_channels; /*!< Host Channels number. 100 This parameter Depends on the used USB core. 101 This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ 102 103 uint8_t dma_enable; /*!< USB DMA state. 104 If DMA is not supported this parameter shall be set by default to zero */ 105 106 uint8_t speed; /*!< USB Core speed. 107 This parameter can be any value of @ref PCD_Speed/HCD_Speed 108 (HCD_SPEED_xxx, HCD_SPEED_xxx) */ 109 110 uint8_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */ 111 112 uint8_t phy_itface; /*!< Select the used PHY interface. 113 This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */ 114 115 uint8_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ 116 117 uint8_t low_power_enable; /*!< Enable or disable the low Power Mode. */ 118 119 uint8_t lpm_enable; /*!< Enable or disable Link Power Management. */ 120 121 uint8_t battery_charging_enable; /*!< Enable or disable Battery charging. */ 122 123 uint8_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ 124 125 uint8_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ 126 127 uint8_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ 128 129 } USB_CfgTypeDef; 130 131 typedef struct 132 { 133 uint8_t num; /*!< Endpoint number 134 This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ 135 136 uint8_t is_in; /*!< Endpoint direction 137 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 138 139 uint8_t is_stall; /*!< Endpoint stall condition 140 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 141 142 uint8_t is_iso_incomplete; /*!< Endpoint isoc condition 143 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 144 145 uint8_t type; /*!< Endpoint type 146 This parameter can be any value of @ref USB_LL_EP_Type */ 147 148 uint8_t data_pid_start; /*!< Initial data PID 149 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 150 151 uint32_t maxpacket; /*!< Endpoint Max packet size 152 This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ 153 154 uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ 155 156 uint32_t xfer_len; /*!< Current transfer length */ 157 158 uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ 159 160 uint8_t even_odd_frame; /*!< IFrame parity 161 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 162 163 uint16_t tx_fifo_num; /*!< Transmission FIFO number 164 This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ 165 166 uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ 167 168 uint32_t xfer_size; /*!< requested transfer size */ 169 } USB_EPTypeDef; 170 171 typedef struct 172 { 173 uint8_t dev_addr; /*!< USB device address. 174 This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ 175 176 uint8_t ch_num; /*!< Host channel number. 177 This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ 178 179 uint8_t ep_num; /*!< Endpoint number. 180 This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ 181 182 uint8_t ep_is_in; /*!< Endpoint direction 183 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 184 185 uint8_t speed; /*!< USB Host Channel speed. 186 This parameter can be any value of @ref HCD_Device_Speed: 187 (HCD_DEVICE_SPEED_xxx) */ 188 189 uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ 190 uint8_t do_ssplit; /*!< Enable start split transaction in HS mode. */ 191 uint8_t do_csplit; /*!< Enable complete split transaction in HS mode. */ 192 uint8_t ep_ss_schedule; /*!< Enable periodic endpoint start split schedule . */ 193 uint32_t iso_splt_xactPos; /*!< iso split transfer transaction position. */ 194 195 uint8_t hub_port_nbr; /*!< USB HUB port number */ 196 uint8_t hub_addr; /*!< USB HUB address */ 197 198 uint8_t ep_type; /*!< Endpoint Type. 199 This parameter can be any value of @ref USB_LL_EP_Type */ 200 201 uint16_t max_packet; /*!< Endpoint Max packet size. 202 This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ 203 204 uint8_t data_pid; /*!< Initial data PID. 205 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 206 207 uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ 208 209 uint32_t XferSize; /*!< OTG Channel transfer size. */ 210 211 uint32_t xfer_len; /*!< Current transfer length. */ 212 213 uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ 214 215 uint8_t toggle_in; /*!< IN transfer current toggle flag. 216 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 217 218 uint8_t toggle_out; /*!< OUT transfer current toggle flag 219 This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ 220 221 uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ 222 223 uint32_t ErrCnt; /*!< Host channel error count. */ 224 uint32_t NyetErrCnt; /*!< Complete Split NYET Host channel error count. */ 225 226 USB_URBStateTypeDef urb_state; /*!< URB state. 227 This parameter can be any value of @ref USB_URBStateTypeDef */ 228 229 USB_HCStateTypeDef state; /*!< Host Channel state. 230 This parameter can be any value of @ref USB_HCStateTypeDef */ 231 } USB_HCTypeDef; 232 233 typedef USB_ModeTypeDef USB_OTG_ModeTypeDef; 234 typedef USB_CfgTypeDef USB_OTG_CfgTypeDef; 235 typedef USB_EPTypeDef USB_OTG_EPTypeDef; 236 typedef USB_URBStateTypeDef USB_OTG_URBStateTypeDef; 237 typedef USB_HCStateTypeDef USB_OTG_HCStateTypeDef; 238 typedef USB_HCTypeDef USB_OTG_HCTypeDef; 239 240 /* Exported constants --------------------------------------------------------*/ 241 242 /** @defgroup PCD_Exported_Constants PCD Exported Constants 243 * @{ 244 */ 245 246 #if defined (USB_OTG_FS) || defined (USB_OTG_HS) 247 /** @defgroup USB_OTG_CORE VERSION ID 248 * @{ 249 */ 250 #define USB_OTG_CORE_ID_300A 0x4F54300AU 251 #define USB_OTG_CORE_ID_310A 0x4F54310AU 252 /** 253 * @} 254 */ 255 256 /** @defgroup USB_Core_Mode_ USB Core Mode 257 * @{ 258 */ 259 #define USB_OTG_MODE_DEVICE 0U 260 #define USB_OTG_MODE_HOST 1U 261 #define USB_OTG_MODE_DRD 2U 262 /** 263 * @} 264 */ 265 266 /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed 267 * @{ 268 */ 269 #define USB_OTG_SPEED_HIGH 0U 270 #define USB_OTG_SPEED_HIGH_IN_FULL 1U 271 #define USB_OTG_SPEED_FULL 3U 272 /** 273 * @} 274 */ 275 276 /** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY 277 * @{ 278 */ 279 #define USB_OTG_ULPI_PHY 1U 280 #define USB_OTG_EMBEDDED_PHY 2U 281 /** 282 * @} 283 */ 284 285 /** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value 286 * @{ 287 */ 288 #ifndef USBD_HS_TRDT_VALUE 289 #define USBD_HS_TRDT_VALUE 9U 290 #endif /* USBD_HS_TRDT_VALUE */ 291 #ifndef USBD_FS_TRDT_VALUE 292 #define USBD_FS_TRDT_VALUE 5U 293 #define USBD_DEFAULT_TRDT_VALUE 9U 294 #endif /* USBD_HS_TRDT_VALUE */ 295 /** 296 * @} 297 */ 298 299 /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS 300 * @{ 301 */ 302 #define USB_OTG_HS_MAX_PACKET_SIZE 512U 303 #define USB_OTG_FS_MAX_PACKET_SIZE 64U 304 #define USB_OTG_MAX_EP0_SIZE 64U 305 /** 306 * @} 307 */ 308 309 /** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency 310 * @{ 311 */ 312 #define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0U << 1) 313 #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1U << 1) 314 #define DSTS_ENUMSPD_FS_PHY_48MHZ (3U << 1) 315 /** 316 * @} 317 */ 318 319 /** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval 320 * @{ 321 */ 322 #define DCFG_FRAME_INTERVAL_80 0U 323 #define DCFG_FRAME_INTERVAL_85 1U 324 #define DCFG_FRAME_INTERVAL_90 2U 325 #define DCFG_FRAME_INTERVAL_95 3U 326 /** 327 * @} 328 */ 329 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ 330 /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS 331 * @{ 332 */ 333 #define EP_MPS_64 0U 334 #define EP_MPS_32 1U 335 #define EP_MPS_16 2U 336 #define EP_MPS_8 3U 337 /** 338 * @} 339 */ 340 341 /** @defgroup USB_LL_EP_Type USB Low Layer EP Type 342 * @{ 343 */ 344 #define EP_TYPE_CTRL 0U 345 #define EP_TYPE_ISOC 1U 346 #define EP_TYPE_BULK 2U 347 #define EP_TYPE_INTR 3U 348 #define EP_TYPE_MSK 3U 349 /** 350 * @} 351 */ 352 353 /** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed 354 * @{ 355 */ 356 #define EP_SPEED_LOW 0U 357 #define EP_SPEED_FULL 1U 358 #define EP_SPEED_HIGH 2U 359 /** 360 * @} 361 */ 362 363 /** @defgroup USB_LL_CH_PID_Type USB Low Layer Channel PID Type 364 * @{ 365 */ 366 #define HC_PID_DATA0 0U 367 #define HC_PID_DATA2 1U 368 #define HC_PID_DATA1 2U 369 #define HC_PID_SETUP 3U 370 /** 371 * @} 372 */ 373 374 /** @defgroup USB_LL Device Speed 375 * @{ 376 */ 377 #define USBD_HS_SPEED 0U 378 #define USBD_HSINFS_SPEED 1U 379 #define USBH_HS_SPEED 0U 380 #define USBD_FS_SPEED 2U 381 #define USBH_FSLS_SPEED 1U 382 /** 383 * @} 384 */ 385 386 #if defined (USB_OTG_FS) || defined (USB_OTG_HS) 387 /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines 388 * @{ 389 */ 390 #define STS_GOUT_NAK 1U 391 #define STS_DATA_UPDT 2U 392 #define STS_XFER_COMP 3U 393 #define STS_SETUP_COMP 4U 394 #define STS_SETUP_UPDT 6U 395 /** 396 * @} 397 */ 398 399 /** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines 400 * @{ 401 */ 402 #define HCFG_30_60_MHZ 0U 403 #define HCFG_48_MHZ 1U 404 #define HCFG_6_MHZ 2U 405 /** 406 * @} 407 */ 408 409 /** @defgroup USB_LL_HFIR_Defines USB Low Layer frame interval Defines 410 * @{ 411 */ 412 #define HFIR_6_MHZ 6000U 413 #define HFIR_60_MHZ 60000U 414 #define HFIR_48_MHZ 48000U 415 /** 416 * @} 417 */ 418 419 /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines 420 * @{ 421 */ 422 #define HPRT0_PRTSPD_HIGH_SPEED 0U 423 #define HPRT0_PRTSPD_FULL_SPEED 1U 424 #define HPRT0_PRTSPD_LOW_SPEED 2U 425 /** 426 * @} 427 */ 428 429 #define HCCHAR_CTRL 0U 430 #define HCCHAR_ISOC 1U 431 #define HCCHAR_BULK 2U 432 #define HCCHAR_INTR 3U 433 434 #define GRXSTS_PKTSTS_IN 2U 435 #define GRXSTS_PKTSTS_IN_XFER_COMP 3U 436 #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5U 437 #define GRXSTS_PKTSTS_CH_HALTED 7U 438 439 #define CLEAR_INTERRUPT_MASK 0xFFFFFFFFU 440 441 #define HC_MAX_PKT_CNT 256U 442 #define ISO_SPLT_MPS 188U 443 444 #define HCSPLT_BEGIN 1U 445 #define HCSPLT_MIDDLE 2U 446 #define HCSPLT_END 3U 447 #define HCSPLT_FULL 4U 448 449 #define TEST_J 1U 450 #define TEST_K 2U 451 #define TEST_SE0_NAK 3U 452 #define TEST_PACKET 4U 453 #define TEST_FORCE_EN 5U 454 455 #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE) 456 #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE) 457 458 #define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE)) 459 #define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\ 460 + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) 461 462 #define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\ 463 + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE))) 464 465 #define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE)) 466 467 #define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE)) 468 #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\ 469 + USB_OTG_HOST_CHANNEL_BASE\ 470 + ((i) * USB_OTG_HOST_CHANNEL_SIZE))) 471 472 473 #define EP_ADDR_MSK 0xFU 474 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ 475 /** 476 * @} 477 */ 478 479 /* Exported macro ------------------------------------------------------------*/ 480 /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros 481 * @{ 482 */ 483 #if defined (USB_OTG_FS) || defined (USB_OTG_HS) 484 #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) 485 #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) 486 487 #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) 488 #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) 489 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ 490 /** 491 * @} 492 */ 493 494 /* Exported functions --------------------------------------------------------*/ 495 /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions 496 * @{ 497 */ 498 #if defined (USB_OTG_FS) || defined (USB_OTG_HS) 499 HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); 500 HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); 501 HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); 502 HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); 503 HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed); 504 HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode); 505 HAL_StatusTypeDef USB_SetDevSpeed(const USB_OTG_GlobalTypeDef *USBx, uint8_t speed); 506 HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx); 507 HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num); 508 HAL_StatusTypeDef USB_ActivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); 509 HAL_StatusTypeDef USB_DeactivateEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); 510 HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); 511 HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); 512 HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma); 513 HAL_StatusTypeDef USB_WritePacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *src, 514 uint8_t ch_ep_num, uint16_t len, uint8_t dma); 515 516 void *USB_ReadPacket(const USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); 517 HAL_StatusTypeDef USB_EPSetStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); 518 HAL_StatusTypeDef USB_EPClearStall(const USB_OTG_GlobalTypeDef *USBx, const USB_OTG_EPTypeDef *ep); 519 HAL_StatusTypeDef USB_EPStopXfer(const USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); 520 HAL_StatusTypeDef USB_SetDevAddress(const USB_OTG_GlobalTypeDef *USBx, uint8_t address); 521 HAL_StatusTypeDef USB_DevConnect(const USB_OTG_GlobalTypeDef *USBx); 522 HAL_StatusTypeDef USB_DevDisconnect(const USB_OTG_GlobalTypeDef *USBx); 523 HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); 524 HAL_StatusTypeDef USB_ActivateSetup(const USB_OTG_GlobalTypeDef *USBx); 525 HAL_StatusTypeDef USB_EP0_OutStart(const USB_OTG_GlobalTypeDef *USBx, uint8_t dma, const uint8_t *psetup); 526 uint8_t USB_GetDevSpeed(const USB_OTG_GlobalTypeDef *USBx); 527 uint32_t USB_GetMode(const USB_OTG_GlobalTypeDef *USBx); 528 uint32_t USB_ReadInterrupts(USB_OTG_GlobalTypeDef const *USBx); 529 uint32_t USB_ReadChInterrupts(const USB_OTG_GlobalTypeDef *USBx, uint8_t chnum); 530 uint32_t USB_ReadDevAllOutEpInterrupt(const USB_OTG_GlobalTypeDef *USBx); 531 uint32_t USB_ReadDevOutEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); 532 uint32_t USB_ReadDevAllInEpInterrupt(const USB_OTG_GlobalTypeDef *USBx); 533 uint32_t USB_ReadDevInEPInterrupt(const USB_OTG_GlobalTypeDef *USBx, uint8_t epnum); 534 void USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); 535 536 HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); 537 HAL_StatusTypeDef USB_InitFSLSPClkSel(const USB_OTG_GlobalTypeDef *USBx, uint8_t freq); 538 HAL_StatusTypeDef USB_ResetPort(const USB_OTG_GlobalTypeDef *USBx); 539 HAL_StatusTypeDef USB_DriveVbus(const USB_OTG_GlobalTypeDef *USBx, uint8_t state); 540 uint32_t USB_GetHostSpeed(USB_OTG_GlobalTypeDef const *USBx); 541 uint32_t USB_GetCurrentFrame(USB_OTG_GlobalTypeDef const *USBx); 542 HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, 543 uint8_t epnum, uint8_t dev_address, uint8_t speed, 544 uint8_t ep_type, uint16_t mps); 545 HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, 546 USB_OTG_HCTypeDef *hc, uint8_t dma); 547 548 uint32_t USB_HC_ReadInterrupt(const USB_OTG_GlobalTypeDef *USBx); 549 HAL_StatusTypeDef USB_HC_Halt(const USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num); 550 HAL_StatusTypeDef USB_DoPing(const USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num); 551 HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); 552 HAL_StatusTypeDef USB_ActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx); 553 HAL_StatusTypeDef USB_DeActivateRemoteWakeup(const USB_OTG_GlobalTypeDef *USBx); 554 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ 555 556 /** 557 * @} 558 */ 559 560 /** 561 * @} 562 */ 563 564 /** 565 * @} 566 */ 567 568 /** 569 * @} 570 */ 571 #endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */ 572 573 #ifdef __cplusplus 574 } 575 #endif /* __cplusplus */ 576 577 578 #endif /* STM32F4xx_LL_USB_H */