1  4.2 x 2 x 1,2 cm
 2  
 3  
 4  Voltage Divider
 5  
 6  up to 17V
 7  
 8   4990R : 340R
 9  
10  
11  Voltage Calibration
12  
13  Provide exactly     16.8V
14  adjust VCC to       5.1V without load
15  Reset, wait until output led turns green
16  
17  Current calibration
18  
19  connect VSENSE to GND
20  add max short time load resistor between output
21  Reset, wait until output led turns red again
22  add max continous time load resistor between output, within 2 minutes
23  output led will first turn green, measuring load, then turn red again
24  done, reconnect VSENSE
25  
26  
27  
28  Current limiting:
29  
30  Peak:
31   Maximim Peak current
32   Compile time Option, defaults to 1.5 times short time level
33  
34  Short Time
35   Timing: compile time option, approx 10 Sec default
36   
37  Continous
38   Integrates over approx 1 minute
39  
40  
41  
42  
43  
44  
45  
46