1  """
 2  Configure the sensor for continuous measurement with rates,
 3  sampling counts and mode optmized for low power, as recommended
 4  in Infineon's datasheet:
 5  https://www.infineon.com/dgdl/Infineon-DPS310-DS-v01_00-EN.pdf
 6  """
 7  
 8  # (disable pylint warnings for adafruit_dps310.{SampleCount,Rate,Mode}.*
 9  # as they are generated dynamically)
10  # pylint: disable=no-member
11  
12  import time
13  import board
14  import busio
15  import adafruit_dps310
16  
17  i2c = busio.I2C(board.SCL, board.SDA)
18  
19  dps310 = adafruit_dps310.DPS310(i2c)
20  
21  dps310.reset()
22  dps310.pressure_oversample_count = adafruit_dps310.SampleCount.COUNT_2
23  dps310.pressure_rate = adafruit_dps310.Rate.RATE_1_HZ
24  dps310.temperature_oversample_count = adafruit_dps310.SampleCount.COUNT_16
25  dps310.temperature_rate = adafruit_dps310.Rate.RATE_1_HZ
26  dps310.mode = adafruit_dps310.Mode.CONT_PRESTEMP
27  dps310.wait_temperature_ready()
28  dps310.wait_pressure_ready()
29  
30  while True:
31      print("Temperature = %.2f *C" % dps310.temperature)
32      print("Pressure = %.2f hPa" % dps310.pressure)
33      print("")
34      time.sleep(10.0)