1  import time
 2  import board
 3  import busio
 4  import adafruit_mprls
 5  
 6  i2c = busio.I2C(board.SCL, board.SDA)
 7  
 8  # Simplest use, connect to default over I2C
 9  mpr = adafruit_mprls.MPRLS(i2c, psi_min=0, psi_max=25)
10  
11  # You can also specify both reset and eoc pins
12  """
13  import digitalio
14  reset = digitalio.DigitalInOut(board.D5)
15  eoc = digitalio.DigitalInOut(board.D6)
16  mpr = adafruit_mprls.MPRLS(i2c, eoc_pin=eoc, reset_pin=reset,
17                             psi_min=0, psi_max=25)
18  """
19  
20  while True:
21      print((mpr.pressure,))
22      time.sleep(1)